软管泵滑模机产品细节

软管泵的润滑保养注意事项：
（1）侧导辊每隔24小时用油枪从注油咀注油（高温锂基脂GB5671—91）一次，注油时注意侧导辊的松紧情况，若发现过松，用尖咀钳将其旋紧，使侧导辊处于良好的润滑状态，如发现侧导辊有异常声音，经调整松紧，仍不能，应考虑侧导辊内铜套是否磨损，将其拆下换铜套。
（2）压辊每隔三个月拆下来保养一次，给内腔和轴承加高温锂基脂（GB5671—91）。
（3）转子轴承每隔三个月加高温锂基脂（GB5671—91）一次。
（4）新的减速机在运行一段时间后，将油箱内的机油放掉，重新加30＃机油。            

软管泵的工作原理及应用：软管在泵体内呈U形布置。当旋转体带动挤压轮旋转时，挤压软管受到挤压轮的挤压而发生弹性变形，然后吸入口形成负压吸浆。通过挤压轮的推动，浆液从出料口排出，形成浆液的压力输送。工业软管泵主要应用于建筑、地下工程、矿山、食品、造纸、陶瓷等领域的粘性浆液远距离输送、计量泵送、压力灌浆、喷射等。  

Working principle and application of hose pump: The hose is arranged in a U-shape in the pump body. When the rotating body drives the extrusion wheel to rotate, the extrusion hose is elastically deformed by the extrusion wheel, and then the suction port forms a negative pressure suction slurry. By the push of the squeeze wheel, the slurry is discharged from the discharge port, forming a pressure transfer of the slurry. Industrial hose pumps are mainly used for the long-distance transportation of viscous slurry in the fields of construction, underground engineering, mining, food, papermaking, ceramics, metering pumping, pressure grouting, spraying, etc.